Computerised servo-motorised tensile testers for accurate measurement of tensile strength, yield strength, elongation, and modulus across metals, polymers, rubber, composites, wire, and springs — compliant with ASTM, ISO, and BIS standards.
TTM Series
The AGMPL TTM Series are fully computerised tensile testing machines built for accurate, repeatable characterisation of material strength. Available in single-column and dual-column floor-standing configurations from 1 kN to 100 kN, they serve R&D laboratories, production quality control, and third-party testing facilities across automotive, aerospace, defence, rubber, polymer, and civil engineering sectors.
A high-stiffness loading frame, backlash-free precision ball screws, and AC servo motor drive combine to deliver 0.25% FSR accuracy with ultra-low crosshead speeds starting from 0.001 mm/min — essential for testing time-sensitive materials such as rubbers, hydrogels, and biological specimens.
Specifications
| Model | Max Load | Resolution | Max Travel | Accuracy | Speed Range | Frame Type |
|---|---|---|---|---|---|---|
| TTM-1 | 1 kN | 0.001 kN | 600 / 1,000 mm | 0.25% FSR | 0.001 – 500 mm/min | Single Column |
| TTM-5 | 5 kN | 0.001 kN | 600 / 1,000 mm | 0.25% FSR | 0.001 – 500 mm/min | Single / Dual Column |
| TTM-10 | 10 kN | 0.01 kN | 600 / 1,000 mm | 0.25% FSR | 0.001 – 500 mm/min | Dual Column |
| TTM-50 | 50 kN | 0.01 kN | 600 / 1,000 mm | 0.25% FSR | 0.1 – 500 mm/min | Dual Column |
| TTM-100 | 100 kN | 0.1 kN | 600 / 1,000 mm | 0.25% FSR | 0.1 – 300 mm/min | Dual Column Floor |
TTM-1 / TTM-5: Single or Dual Column Table Top · TTM-10 and above: Dual Column Floor Standing
Custom MachineStandard Equipment
Auto Load Cell Recognition
Plug-and-play load cell identification stores calibration parameters on-device — no manual range setup required when swapping load cells.
Precision Ball Screw Drive
Backlash-free, preloaded precision ball screws deliver smooth, repeatable crosshead motion with ≥95% mechanical transmission efficiency.
AC Servo Motor Control
Brushless AC servo motor with vector-control VFD ensures stable crosshead speed from 0.001 mm/min across the full load range — maintenance-free operation.
High-Stiffness Loading Frame
Rigid welded steel frame minimises deflection under full rated load, ensuring that recorded deformation reflects specimen behaviour, not machine compliance.
Auto Touch-Load Detection
Automatically senses contact with the specimen before the test cycle begins — eliminates pre-load errors and ensures consistent gauge-length zeroing.
Extensometer Interface
Built-in analogue and digital extensometer ports for clip-on, laser, and video extensometers — supports automatic removal notification and yield-point detection.
Real-Time Data Acquisition
1,000 Hz sampling rate with simultaneous force, displacement, and stress-strain plotting. Switch between force-displacement and stress-strain views during the test.
Multi-Format Reporting
Test reports exported as PDF, Excel, or CSV. Includes load-extension and stress-strain curves, peak load, elongation-at-break, Young's modulus, and statistical summaries.
Inbuilt Safety Systems
Electronic overload protection, upper and lower limit switches, and emergency stop prevent damage to grips, load cells, and specimens at any stage of testing.
Industries & Materials
Metals & Alloys
Ultimate tensile strength, yield strength, and elongation of steel, aluminium, copper, and titanium per ASTM E8/E8M and IS 1608.
Polymers & Plastics
Tensile modulus, elongation-at-break, and yield stress of rigid and flexible plastics, films, and moulded parts.
Rubber & Elastomers
Tensile strength and elongation of vulcanised rubber, seals, O-rings, and compound specimens for automotive and industrial applications.
Composites
Fibre-reinforced plastics (FRP), carbon-fibre, and glass-fibre laminate tensile characterisation for aerospace, automotive, and civil structures.
Wire, Springs & Fasteners
Pull-out force, break-load, and elongation of spring wire, wire rope, tension springs, and threaded fasteners for automotive and defence applications.
Textiles & Packaging
Grab tensile, strip tensile, and peel tests on woven fabrics, films, laminates, and adhesive-bonded assemblies.
Compliance
TTM Series machines ship with built-in test methods for the most widely referenced international and Indian tensile testing standards. Custom methods can be configured on request.
| Standard | Application / Material |
|---|---|
| ASTM E8 / E8M | Metals — ambient temperature |
| ASTM D638 | Rigid plastics |
| ASTM D412 | Rubber & elastomers |
| ASTM D3039 | Polymer matrix composites |
| ASTM A370 | Steel products & fasteners |
| ISO 6892-1 | Metallic materials — ambient |
| ISO 527 | Plastics tensile |
| ISO 37 | Rubber — dumbbell specimens |
| IS 1608 Part 1 | Metallic materials (BIS) |
| IS 1608 Part 2 | High temperature (BIS) |
| ASTM D5034 | Textiles — grab tensile |
| ISO 13934 | Fabrics — tensile properties |
Optional Add-Ons
Mechanical Wedge Grips
Self-tightening action for flat and round tensile specimens — supplied in matched pairs for consistent alignment.
Pneumatic Grips
Air-actuated clamping for consistent grip pressure on soft, fragile, or repetitive-batch specimens.
Screw-Action Grips
Manual tightening grips for round bar, wire, and threaded specimens — includes adaptor inserts.
Peel & Adhesion Fixture
90° and 180° peel test fixtures for films, tapes, labels, and laminated packaging materials.
Electronic Clip-On Extensometer
100 mm gauge length, 25 mm max extension. Auto-removal signal prevents damage at break.
Video Extensometer
Non-contact optical strain measurement — ideal for small specimens, elastomers, and delicate materials that cannot accept clip-on devices.
High-Temperature Chamber
Integral chamber for elevated temperature testing up to 350 °C, with through-the-door grip arms.
Low-Temperature Bath Fixture
Subzero specimen conditioning down to −70 °C for cold-climate material characterisation.
Why AG Measurematics
Four Decades of Expertise
AGMPL has designed and manufactured precision testing equipment for India's most demanding industries — defence, aerospace, automotive, and railways — since 1986.
In-House Calibration & NABL Traceability
All machines are calibrated to NABL-traceable standards before dispatch. On-site calibration and annual maintenance contracts are available across India.
Application Engineering Support
Our engineers work with you to select the right capacity, grips, extensometer, and software configuration — and will design custom test methods for non-standard specimens.
Rapid Spares & Service
Critical spare parts — load cells, ball screws, motor drives — are stocked in India for fast turnaround. Remote diagnostics via PC link minimises downtime.
Tell us your material, capacity, and standard — our team will recommend the right TTM model and grip configuration within one business day.
Also in Springs
Computerized Spring Testing Machines (1~100KN)
View product →
Leaf Spring Testing Systems
View product →
Manual Spring Testers
View product →
Spring Fatigue Testing Machines
View product →
Torsion Spring Testing System
View product →
Universal Testing Machine
View product →
From benchtop 1 kN units for polymer films to 100 kN floor machines for structural steel — we configure every TTM to your standard, specimen, and workflow.
Trade Shows & Exhibitions
Upcoming Events 2026Tire Technology Expo
Deutsche Messe, Hannover, Germany
Learn More →
TyreXpo Asia Bangkok
BITEC, Bangkok, Thailand
Learn More →
Automotive Engineering Exposition 2026 Yokohama
PACIFICO Yokohama, Japan
Learn More →
Automechanika Dubai
Dubai Exhibition Centre, Expo City Dubai
Learn More →
Trusted By Leading Manufacturers
* Representative client list. Logos shown are for illustrative purposes.