Resources
A centralised reference for every national and international testing standard relevant to AGMPL products and services — searchable by industry, category, or issuing body.
Metallic Materials — Calibration and Verification of Static Uniaxial Testing Machines
Updated 1 Dec 2025
Metallic Materials — Calibration of Force-Proving Instruments
Updated 1 Dec 2025
Standard Practices for Force Verification of Testing Machines
Updated 1 Dec 2025
General Requirements for the Competence of Testing and Calibration Laboratories
Updated 1 Dec 2025
Specifies test method for transverse vibration resistance of bolted connections in railway vehicles.
Rev. 2004
Updated 15 Sept 2025
Junker-method vibration test for aerospace fastener locking performance evaluation.
Rev. 2001
Updated 15 Sept 2025
Tyre endurance, load/speed performance, and plunger energy test requirements for passenger vehicle tyres.
Rev. 2023
Updated 1 Oct 2025
Dynamic growth, endurance, and speed performance tests for 2W/3W tyres.
Rev. 2018
Updated 1 Oct 2025
Standard laboratory test methods for tyre endurance and high-speed capability verification.
Rev. 2021
Updated 1 Oct 2025
BIS standard for tyre dynamic growth and endurance testing of 2W/3W vehicle tyres.
Rev. 2020
Updated 1 Oct 2025
Measurement of tyre rolling resistance on a force method test machine for fuel efficiency evaluation.
Rev. 2019
Updated 1 Oct 2025
US federal safety standard for endurance and high-speed performance of radial passenger car tyres.
Rev. 2007
Updated 1 Oct 2025
German standard for drum-based endurance testing of vehicle tyres.
Rev. 2008
Updated 1 Oct 2025
Type-approval requirements for commercial vehicle tyres including endurance and speed tests.
Rev. 2018
Updated 1 Oct 2025
BIS specification for design, testing, and acceptance of helical compression springs.
Rev. 2020
Updated 20 Sept 2025
European standard for design calculation and quality testing of helical springs.
Rev. 2013
Updated 20 Sept 2025
Classic German standard for compression spring design, calculation, and testing.
Rev. 2006
Updated 20 Sept 2025
Quality inspection and acceptance standard for mass-produced helical compression springs.
Rev. 2015
Updated 20 Sept 2025
Test procedures for measuring force-velocity characteristics of automotive shock absorbers.
Rev. 2019
Updated 18 Sept 2025
SAE standard covering terminology, classification, and test procedures for automotive dampers.
Rev. 2016
Updated 18 Sept 2025
European standard for testing and approval of rubber air spring components in railway vehicles.
Rev. 2016
Updated 1 Nov 2025
European standard for bogie and wheelset component testing in railway applications.
Rev. 2020
Updated 1 Nov 2025
International Union of Railways specification for bogie construction and suspension testing.
Rev. 2009
Updated 1 Nov 2025
Indian Railways RDSO specification for type-approval of air springs in railway bogies.
Rev. 2022
Updated 1 Nov 2025
Test methods for characterisation and qualification of railway hydraulic dampers.
Rev. 2013
Updated 1 Nov 2025
BIS standard for testing physical and mechanical properties of vulcanised rubber components.
Rev. 2019
Updated 1 Nov 2025
US military standard for environmental testing of materials and equipment including vibration tests.
Rev. 2019
Updated 15 Aug 2025
Test method for measuring vibration damping properties of materials using beam specimens.
Rev. 2017
Updated 15 Aug 2025
US military specification for nylon parachute cord tensile strength and quality requirements.
Rev. 1978
Updated 15 Aug 2025
Test method for tensile break strength and elongation of webbing and braided materials.
Rev. 2021
Updated 15 Aug 2025
Specification and test methods for single-use sterile hypodermic needles including puncture force.
Rev. 2016
Updated 20 Jul 2025
Specification for stainless steel tubing used in needle and cannula manufacturing.
Rev. 2016
Updated 20 Jul 2025
Quality management system standard for medical device manufacturers and their supply chain.
Rev. 2016
Updated 20 Jul 2025
Standard for MCB mechanical endurance testing and overcurrent trip performance.
Rev. 2019
Updated 15 Jun 2025
Standard for MCCB testing including mechanical endurance and short-circuit performance.
Rev. 2019
Updated 15 Jun 2025
BIS specification for MCB design, testing, and acceptance requirements.
Rev. 2020
Updated 15 Jun 2025
US federal safety standard for steering wheel structural strength and rearward displacement limits.
Rev. 2011
Updated 10 Sept 2025
UNECE regulation for steering system impact protection and structural testing.
Rev. 2019
Updated 10 Sept 2025
Calibration standard for force measurement accuracy of testing machines.
Rev. 2018
Updated 1 Dec 2025
Calibration standard for force transducers and proving rings used as transfer standards.
Rev. 2011
Updated 1 Dec 2025
ASTM practices for verifying force accuracy of tensile, compression, and universal testing machines.
Rev. 2021
Updated 1 Dec 2025
International standard for laboratory quality management and technical competence.
Rev. 2017
Updated 1 Dec 2025
International standard for quality management systems across all industries.
Rev. 2015
Updated 1 Dec 2025
Automotive QMS standard building on ISO 9001 with automotive-specific requirements.
Rev. 2016
Updated 1 Dec 2025
BIS standard for geotechnical soil testing methods including triaxial and consolidation tests.
Rev. 2020
Updated 15 May 2025
Triaxial compression test procedure for cohesive soils under unconsolidated-undrained conditions.
Rev. 2015
Updated 15 May 2025
Active
Current revision in force. Machines are compliant.
Under Review
New revision is being evaluated for adoption.
Superseded
Replaced by a newer standard. Check replacement.
Upcoming
Published but not yet effective or adopted.
Our engineers have deep expertise in testing standards across automotive, aerospace, railways, and more.
Trade Shows & Exhibitions
Upcoming Events 2026Tire Technology Expo
Deutsche Messe, Hannover, Germany
Learn More →
TyreXpo Asia Bangkok
BITEC, Bangkok, Thailand
Learn More →
Automotive Engineering Exposition 2026 Yokohama
PACIFICO Yokohama, Japan
Learn More →
Automechanika Dubai
Dubai Exhibition Centre, Expo City Dubai
Learn More →
Trusted By Leading Manufacturers
* Representative client list. Logos shown are for illustrative purposes.